|
LATHES PUMA 400 B CNC LATHE, 21” POWER CHUCK, 30.3” SWING-OVER BED, 22.4” MAXIMUM TURNING DIAMETER, 44.7” BETWEEN CENTERS, 5.2” SPINDLE BORE, 2000 MAX RPM, 50HP SPINDLE DRIVE.
PUMA 300 LC CNC LATHE, 12” POWER CHUCK, 23.2” SWING-OVER BED, 15.7” MAXIMUM TURNING DIAMETER, 52.8” BETWEEN CENTERS, 4.53” SPINDLE BORE, 2800 MAX RPM, 35HP SPINDLE DRIVE.
MORI-SEIKI SL-6B CNC LATHE, FANUC 6T CONTROL, 25" POWER CHUCK, 34.9" SWING-OVER BED, 25.9" MAXIMUM MACHINING DIAMETER, 26" BETWEEN CENTERS, 6.2" SPINDLE HOLE, 10-1010 R.P.M., 30 HP DRIVE MOTOR.
MAZAK ST-50 CNC LATHE, 28” POWER CHUCK, 33” SWING-OVER BED, 32” MAXIMUM MACHINING DIAMETER, 60” BETWEEN CENTERS, 4” SPINDLE HOLE
DAEWOOD PUMA-12 CNC LATHE, FANUC CONTROL, 12" POWER CHUCK 22.8" SWING-OVER BED, 12.5" MAXIMUM MACHINING DIAMETER, 30" BETWEEN CENTERS, 35" SPINDLE HOLE, 20-2500 R.P.M., 30 HP DRIVE MOTOR.
H.E.S. ENGINE LATHE, 21-3/4" SWING-OVER BED, 12-5/8" SWING-OVER CROSS SLIDE, 72" BETWEEN CENTERS, 45-1800 R.P.M.
VERTICAL TURNING LATHES
- TOSHIBA TUE 15 CNC VERTICAL LATHE, 59” TABLE, 71” MAX SWING, 59” MAXIMUM CUTTING HEIGHT, 35.4” BORE STROKE, 2-300 RPM RANGE, 40HP DRIVE MOTOR, TOOL CAPACITY (12).
BORING, MILLING AND DRILLING EQUIPMENT - MACHINING SYSTEMS HMC200 CNC HORIZONTAL MACHINING CENTER, 4 PALLETS, 50 TOOL CHANGE SYSTEM, 120” X-AXIS (LONGITUDINAL), 60” Y-AXIS (VERTICAL), 60” Z-AXIS CROSS, 35 HP SPINDLE DRIVE MOTOR WITH D-650 RPM LOW RANGE, 0-24N RPM HIGH RANGE.
- MACHINING SYSTEMS HMC 60 CNC HORIZONTAL MACHINING CENTER, 4-PALLETS, 48 TOOL CHANGE SYSTEM, 60” X-AXIS (LONGITUDINAL), 40” Y-AXIS (VERTICAL), 28” Z-AXIS (CROSS), 32 HP SPINDLE DRIVE MOTOR WITH D-650 RPM LOW RANGE, D-2400 RPM HIGH RANGE.
- DAEWOOD DHC-400 HORIZONTAL MACHINING CENTER 2 PALLET, 40-TOOL CHANGING SYSTEM, 24” X-TRAVEL, 22” Y-TRAVEL, 22” Z-TRAVEL, 35HP SPINDLE MOTOR WITH 10,000 MAX RPM.
SHAPING AND SLOTTING EQUIPMENT
MORRISON SLOTTER, ¾” SIDE BY 9” STROKE MAXIMUM DIMENSIONS.
MITTS AND MERRILL NO. 4 KEYSEATER, 1-1/2’ WIDE BY 18” STROKE MAXIMUM DIMENSIONS.
THREADING EQUIPMENT
(1) LANDUS PIPE THREADING MACHINE 3” – 6”.
(1) ACME BOLT THREADING MACHINE.
(1) 2” OSTER PIPEMASTER PIPE AND BOLT THREADING MACHINE.
CRANKSHAFT GRINDING
(1) STORM VULCAN – MATTONI GRINDER UP TO 18” SWING LENGTH, 6” CENTERS, 7” STROKE
FABRICATION/WELDING EQUIPMENT
(1) MILLERMATIC S-325 SQUIRT WELDER.
(1) MILLER 330A/BP AC/DC TIG MACHINE.
(1) MILLER CP-300 MIG MACHINE WITH COBRAMATIC PUSH PULL WIRE FEED SYSTEM.
(1) CHICAGO BRIDGE & IRON COMPANY - 500 AMP DC ARC WELDER.
(3) LINCOLN SHIELD ARC SA-200 VARIABLE VOLTAGE DC PORTABLE WELDER, GAS OPERATED.
(1) MILLER ROUGHNECK 2E CONSTANT CURRENT AC ARC PORTABLE WELDER, GAS OPERATED.
(1) MILLER MP 65E DC MIG MACHINE WITH WIRE FEEDER.
(1) ONE TON FORD TRUCK WITH LINCOLN 250 DIESEL WELDING MACHINE.
(1) HYPERTHERM MAX 40 PLASMA CUTTING SYSTEM.
(2) VICTOR MDL VU 160 TRACK TORCH.
(1) HEAT SHAPE CUTTER RC SERIES.
(5) PORTABLE ACETYLENE CUTTING RIGS.
(1) PHOENIX DRY ROD OVEN TYPE 300.
(1) 8" x 5" METAL ROLL
(1) CONNECTICUT HAND OPERATED BENDING BRAKE MDL 422 48".
(1) CHAMBERSBURG ENGINEERING COMPANY HORIZONTAL 145 TON HYDRAULIC PRESS.
(1) SHOP MADE 150 TON PRESS.
(1) SHOP MADE VERTICAL 35 TON HYDRAULIC PRESS.
(1) CLAUSING DRILL PRESS.
(1) PEDDINGHAUS SUPER 13 IRON WORKER MODEL 210.
(1) SIBLEY MACHINE CORPORATION DRILL PRESS.
(1) LINDE VI400 CV/DC MIG MACHINE WITH WIRE FEEDER.
GRINDING EQUIPMENT
PRATT & WHITNEY 14” HYDRAULIC VERTICAL SURFACE GRINDER.
SUNNEN MBB-1650 PRECISION HONING MACHINE.
PORTER-CABLE 4” VERTICAL BELT SANDER.
VARIOUS TOOL AND DRILL GRINDING EQUIPMENT.
SAW EQUIPMENT
9” HORIZONTAL BAND SAW.
17” MARVEL VERTICAL BAND SAW.
EVERETT MODEL 26 ABRASIVE CUT OFF SAW.
SET-UP AND INSPECTION EQUIPMENT
VARIOUS GAGES AND INSPECTION TOOLS.
FARO PORTABLE COORDINATE MEASURING MACHINE.
|
Home 
Customer Service 
